FileCobra Logo FileCobra
GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC Icon
Open Source v2.0.2 ✓ Checksum Published

Download GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC v2.0.2 for Windows PC

Graphical front end for smartctl that displays S.M.A.R.T. attributes, drive identity and error logs for HDDs and SSDs, and runs short, long and conveyance...

Technical Specifications & System Requirements

Developer Alexander Shaduri
Platform & OS Windows 7 / 8 / 10 / 11
Package Size 24.6 MB
Architecture x64
Package Format EXE Installer
Security Verification SHA-256 checksum published
SHA-256 Cryptographic Checksum Computed from the file we serve
d0af33e71cee0d3e25142b615d673ec93e87d6ad27c78086155d49d971b52c03
$ Get-FileHash .\gsmartcontrol-pc.exe -Algorithm SHA256

Software notes

The Bottom Line: GSmartControl is for people who want the actual data behind a drive's health, not a single green tick. Every S.M.A.R.T. attribute is shown with its raw value, its normalised score and its threshold, the error log is readable without a terminal, and you can start the drive's own built-in self-tests and watch them report back. That depth makes it the tool a technician reaches for when a disk is behaving strangely and a consumer health checker has said nothing useful. The trade-off is interpretation. The program presents the evidence faithfully but will not translate a rising reallocated-sector count into plain advice for a non-technical owner, and some drives — particularly behind USB bridges or RAID controllers — expose incomplete data or none at all. Its interface is functional and dense rather than friendly, and it has no monitoring service watching your drives while you work. Used alongside a simpler health summary tool it forms the deep end of a sensible toolkit: one program to raise the alarm in plain language, and this one to examine exactly what the drive itself is reporting before you decide to replace it.

Features

  • The full S.M.A.R.T. attribute table is displayed with raw values, normalised values, thresholds and failure flags, so you can judge a drive from its underlying evidence instead of trusting a single summary percentage.
  • Short, extended and conveyance self-tests can be launched from the interface and their progress and results tracked in the self-test log, letting the drive's own firmware check its surface and mechanics.
  • Drive identity details including model, serial number, firmware, capacity, rotation rate and supported features are gathered on one screen, which is exactly the information a warranty claim or replacement purchase needs.
  • Attributes in a pre-failure or warning state are highlighted visually in the list, so the entries that matter stand out from dozens of harmless statistics when you scan a report quickly.
  • Reports can be saved as text files and the underlying smartctl output can be viewed directly, which makes the tool useful for support tickets and for keeping a dated health record of each drive.

Considerations

  • Raw S.M.A.R.T. data needs interpretation, and the program does not translate worrying attributes into plain-language advice, so beginners may not recognise a dying drive when they see one.
  • Some USB enclosures, RAID controllers and NVMe drives expose partial data or none at all through this route, because the bridge or controller does not pass the commands through fully.
  • There is no background monitoring or alerting; the program reports only when you open it and look, unlike tools designed to watch drives continuously and warn you automatically.

How GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC Compares to Top Alternatives

CrystalDiskInfo ↗ vs GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

CrystalDiskInfo summarises drive health as a clear status and percentage with temperature at a glance, which suits everyday monitoring far better. GSmartControl shows the complete attribute table, logs and self-test controls underneath that summary, for when you need to investigate rather than glance.

Best for:
CrystalDiskMark ↗ vs GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

CrystalDiskMark measures how fast a drive reads and writes; it says nothing about whether the drive is dying. GSmartControl measures nothing about speed at all — the two are complementary, answering 'how fast is it' and 'how healthy is it' respectively.

Best for:
HWMonitor ↗ vs GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

HWMonitor watches live temperatures, voltages and fan speeds across the whole system, including a drive temperature reading. GSmartControl ignores the rest of the PC and goes far deeper on the drive itself, with firmware logs and self-tests HWMonitor does not offer.

Best for:

About & Overview: GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

GSmartControl 2.0.2 is an open-source graphical interface by Alexander Shaduri for the smartmontools package, principally smartctl. Instead of command-line output, it presents each drive's model, serial number, capacity and firmware, its full S.M.A.R.T. attribute table with raw and normalised values, error and self-test logs, and buttons to run short, extended and conveyance tests. It works with SATA and many USB-attached drives, highlights attributes that have crossed thresholds, and can save a full report as a text file.

In-Depth: GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

Reading a S.M.A.R.T. Table Without Fooling Yourself

Each attribute line carries several numbers that mean different things. The value column is a normalised score, usually starting near 100 or 200 and counting down as the drive wears; the worst column remembers its lowest point; the threshold is the line the manufacturer says should not be crossed. The raw column is the actual measurement — hours powered on, degrees, or a count of events — and for the attributes that predict failure, raw is where the truth lives. A reallocated-sector raw count that climbs from zero to fifty over a month is a drive quietly remapping dead areas, and it matters long before the normalised value approaches its threshold. Current pending sectors, offline uncorrectable errors and reported uncorrectable errors deserve the same attention. Temperature and power-on hours provide context rather than alarms on their own. The discipline GSmartControl encourages is to save reports over time and compare them, because a trend is far more diagnostic than any single reading. One warning about interpretation: raw values are not standardised between manufacturers, and some raw fields pack several counters into one number, so compare a drive against its own past rather than against a different brand's table.

Self-Tests, Logs and Drives That Hide

S.M.A.R.T. is passive recording until you ask the drive to examine itself. The short self-test exercises electronics, mechanics and a sample of the surface in minutes; the extended test reads the whole surface and exposes weak areas the attribute table has not yet counted, at the cost of hours on a large disk; the conveyance test targets transport damage. GSmartControl starts these tests, polls their progress and files the outcome in the self-test log alongside previous runs, so a drive accumulates a test history you can show a support desk. The error log is the other half of the evidence — it records the drive's most recent internal errors with timestamps in power-on hours, which lets you correlate a freeze last Tuesday with what the drive was doing. Access is the practical obstacle. Drives behind cheap USB bridges, some RAID controllers and certain external enclosures refuse to answer, appearing with unknown identity or an empty attribute page. The program exposes device-type options that coax many bridges into passing commands through, and a direct SATA connection settles the question when an enclosure will not cooperate. Knowing whether silence means a healthy drive or a blocked question is itself a diagnostic skill this tool teaches.

Where GSmartControl Sits Beside Simpler Health Tools

Most Windows users meet drive health through a summary tool that reduces everything to Good, Caution or Bad with a percentage. That summary is valuable as a tripwire and GSmartControl does not replace it — it has no tray icon, no scheduled watch and no plain-language verdict. Its role begins when the summary says Caution, when a drive clicks or vanishes intermittently, when you are deciding whether a second-hand drive is worth buying, or when a warranty claim needs evidence. Then the attribute table, error log and a completed extended self-test form a case that a single percentage cannot. The program's open-source nature matters here too: it is a transparent window onto smartctl, a tool system administrators have trusted for decades, rather than a proprietary black box asking to be believed. The sensible arrangement for a careful owner is both layers — a simple monitor for everyday warning, GSmartControl for investigation, and backups regardless of what either reports, because every drive-health tool, this one included, is a forecast and not a promise. Drives fail suddenly with clean tables often enough that no reading should ever be treated as a substitute for a copy of your data somewhere else.

How to Install & Verify GSmartControl — S.M.A.R.T. Drive Health GUI for smartctl for Windows PC

STEP 1
Download the Windows installer

Get GSmartControl 2.0.2 for Windows from the developer's site; the installer includes the smartmontools components it needs.

STEP 2
Run setup as administrator

Install with default options; administrator rights are needed later so the program can query drives directly.

STEP 3
Launch and scan drives

Open GSmartControl and let it detect attached drives; each appears as an icon labelled with model and capacity.

STEP 4
Open a drive and read its attributes

Double-click a drive, review the Identity and Attributes tabs, and note any highlighted pre-failure entries before running tests.

STEP 5
Run a short self-test

From the Self-Tests tab start a short test, wait for completion, then save the full report as a text file for your records.

Related Windows PC Software & Alternatives

TreeSize Free: Hard Drive Storage Space Analyzer icon
TreeSize Free 9.1.5 • Freeware
DriverStore Explorer — Clean Old Driver Packages from the Windows DriverStore for Windows PC icon
DriverStore Explorer — Clean Old Driver Packages from the Windows DriverStore for Windows PC 1.0.75 • Open Source
System Informer: Advanced Task Manager & Diagnostics icon
System Informer 4.0.26241.138 • Open Source
CapFrameX — Frametime Capture and Analysis Overlay for PC Games for Windows PC icon
CapFrameX — Frametime Capture and Analysis Overlay for PC Games for Windows PC 1.9.2.4 • Open Source
Floorp — Customisable Firefox Fork with Workspaces and Vertical Tabs for Windows PC icon
Floorp — Customisable Firefox Fork with Workspaces and Vertical Tabs for Windows PC 12.20.2 • Open Source
WinDirStat Disk Usage for Windows PC icon
WinDirStat Disk Usage for Windows PC /v2.9.3 • GPL v3

Frequently Asked Questions & Verification Guide

What does GSmartControl actually check?

It reads the S.M.A.R.T. monitoring data that the drive's own firmware maintains: attributes such as reallocated sectors, pending sectors, temperature, power-on hours and uncorrectable errors, plus the drive's internal error log. It can also command the drive to run its built-in self-tests. This is the drive reporting on itself, not a benchmark of speed. A drive can pass S.M.A.R.T. and still fail, but a drive failing S.M.A.R.T. should be replaced promptly.

Why does my USB drive show no attributes?

Many USB-to-SATA bridge chips do not pass S.M.A.R.T. commands through to the drive, so the program sees the enclosure but not the monitoring data behind it. Trying a different enclosure, a direct SATA connection, or the drive manufacturer's own tool are the practical workarounds. Some bridges need a specific device-type setting in the program's options before data appears. This is a hardware limitation of the adapter rather than a fault in the drive or the software.

Which self-test should I run?

Start with the short test, which takes a few minutes and checks electrical and mechanical basics plus a small portion of the surface. If it fails, back up immediately and plan a replacement. The extended test scans the entire surface and can take hours on a large hard drive, so it suits an overnight run when you suspect surface damage. The conveyance test is designed for detecting damage after a drive has been transported or dropped.

Does GSmartControl support NVMe SSDs?

Support for NVMe devices depends on the smartmontools version bundled with your build and on Windows driver access, and NVMe drives expose a different, smaller health log rather than the classic attribute table. Recent builds read basic NVMe health information such as temperature, wear percentage and error entries. For a full NVMe-specific report, the drive maker's own utility may show more. SATA HDDs and SSDs remain the program's most complete territory.

Is GSmartControl free?

Yes. It is open-source software released under GPL licences and free to use at home and at work, and it bundles or works alongside smartmontools, which is also open source. The Windows installer can be downloaded from the developer's site without registration or payment. Donations are accepted by the project but are not required for any feature.