# FanControl for Windows PC - **Name:** FanControl for Windows PC - **Version:** 284 - **Developer:** Rem0o - **License:** Freeware - **Platform:** Windows - **Requires:** Windows 10 / 11 - **File type:** EXE Installer - **Size:** 19.9 MB - **Category:** System & Utilities - **Updated:** 2026-10-22 - **SHA-256:** 7acd59c818ac11ce44dc7318f682c6dfaa59c8dfbfd70a44d28202a357289451 - **Canonical page:** https://filecobra.com/app/fancontrol-fan-speed-pc/ - **Download page:** https://filecobra.com/download/fancontrol-fan-speed-pc/ - **Direct download:** https://github.com/Rem0o/FanControl.Releases/releases/download/V284/FanControl_284_net_10_0_Installer.exe > FanControl V284 is the free fan-curve tool PC builders swear by — map every fan and pump to CPU, GPU, or mixed temperature curves and silence your rig without cooking it… FanControl by Rem0o is the definitive free fan-curve editor for Windows. It reads temperatures from your CPU, GPU, motherboard, and drives (via Libre Hardware Monitor sensors), then maps any fan or pump in the system to custom curves — graph curves, target temperatures, mix curves that take the hotter of two sensors, and flat emergency profiles. Multiple configurations can be saved and switched, and sensors can be combined so a case fan responds to GPU heat during games instead of CPU heat. Version V284 continues the rapid release cadence, with plugins extending support to devices like Corsair and NZXT controllers. ## Installation 1. **Download the installer** — Download FanControl from the official vendor link on this page. 2. **Run the setup** — Open the downloaded installer and follow the setup steps. 3. **Build your first curve** — Launch FanControl, let it detect your fans and sensors, then create a curve and assign it to each fan. ## Editorial verdict FanControl replaced BIOS fan tuning for most PC builders because it solves the actual problem: a case fan should react to the component that is hot, which changes between desktop work and gaming. Its mix curves — 'spin the intake fans based on whichever is hotter, CPU or GPU' — are impossible in most BIOS interfaces, and the graph editor makes a sensible curve a two-minute job. Sensor coverage through Libre Hardware Monitor is broad, and the app happily controls motherboard headers, GPU fans, and many AIO pumps from one screen. Version V284 keeps the project's brisk update pace (roughly monthly) and its plugin system keeps adding hardware support the author never touches personally. Honest caveats: the first-run auto-detection can mislabel fans, so a rename-and-test pass is part of setup; and like all low-level hardware tools it deserves care — a bad curve is your own doing. There is no account, no ads, and no paid tier. For anyone who has built a PC in the last five years, FanControl is close to mandatory. It also remembers your hardware layout between versions, so updating rarely means rebuilding curves — a small mercy anyone who has re-tuned a BIOS fan page after a firmware flash will appreciate immediately. ### Strengths - Mix curves let any fan respond to the maximum of several temperature sensors — the feature BIOS fan control fundamentally lacks. - Reads CPU, GPU, motherboard, and storage sensors through Libre Hardware Monitor, covering the vast majority of consumer hardware. - Multiple saved profiles (quiet desktop, gaming, render) switch in one click or automatically with the built-in scheduler and triggers. - Plugin architecture extends control to Corsair, NZXT, and other proprietary controllers without waiting for core updates. - Free, lightweight, and updated roughly monthly — no account, no ads, no subscription, and portable use is supported. ### Trade-offs - First-time setup requires identifying which detected fan is physically which, and mislabeled headers mean a short trial-and-error session. - As a low-level hardware tool it grants real power: a careless curve can let components run hot, so sensible minimums are the user's responsibility. - A small number of laptops and OEM motherboards expose no standard fan control, and no software — including this — can fix that. ## FAQ **Is FanControl free?** Yes. FanControl is free software by Rem0o, supported voluntarily through Patreon. There are no ads or paid features. **Is FanControl safe for my hardware?** Used sensibly, yes — it is the most widely used fan tool in the PC-building community. Keep a reasonable minimum fan speed and monitor temperatures after changing curves. **Does FanControl work with my motherboard and GPU?** In most cases yes. It reads sensors via Libre Hardware Monitor and controls standard motherboard headers and GPU fans; plugins add support for many Corsair and NZXT devices. **What is the difference between the .NET 10 and .NET 4.8 builds?** They are the same FanControl on different runtimes. The .NET 10 build is the current default for Windows 10/11 (this download); the 4.8 build suits older setups. **Can FanControl start automatically with Windows?** Yes. It can run at logon via Task Scheduler integration and load your chosen profile, so curves apply from boot. --- Source: https://filecobra.com/app/fancontrol-fan-speed-pc/ · Mirrored from the publisher's own release channel by FileCobra. FileCobra runs no antivirus lab of its own.